FORAGE COMBINE HARVESTER ON TRACK WITH TANKER “PALESSE FS6033C”

2 YEARS Warranty
FORAGE COMBINE HARVESTER ON TRACK WITH TANKER “PALESSE FS6033C”
330h.p.
Engine power
3,0
Rough-steamed crops header width, m
5,0
Grass header width, m
3,0
Pick-up width, m

kbk6033Harvester FS6033C cuts maize (in any ripeness stage), sorghum, sunflower and other rough-stemmed crops, mows grass and pickups swaths of slightly dried seeded and natural grass with simultaneous chopping and loading directly into vehicle or storing of chopped silage in the bunker followed by unloading into vehicle.

Forage harvester PALESSE FS6033C is equipped with caterpillar tracks with reinforced rubber tracks and storage hopper with the unloading conveyor, designed special for forage conservation in areas with high soil moistening. In such circumstances, when the forage fields are impassable for vehicles, harvester provides conservation of milled forage with its storing in the bunker, and the mass unloading from the bunker into the body of vehicles takes place at the edge of the field.

By normal bearing capacity of the soil the unloading can be done directly through silage duct into the body of the moving beside vehicle or tractor trailer. Separate hydraulic drive of each track provides the harvester high maneuverability.

Engine
Engine model   JaMZ-65853
Engine power h.p. 330
Fuel tank volume, not less than l 520
Motion speed
Operating speed km/h up to 10
Traveling speed, km/h km/h up to 20
Operating height of cutting device
-header for stemmed crops harvesting mm 120-300
-header for grass harvesting mm 50-120
Chopping device
Chopping device   drum type
Diameter of chopping device mm 630
Cutting length:
-20 knives mm 6…14
-10 knives mm 12…28
Frequency of drum rotation rpm 1155
Adjustment of cutting length   remote-controlled
Knives sharpening   automatically
Silage duct
Reversal silage duct with the possibility of unloading into the bunker or moving beside vehicle
Maximal loading height of chopped silage in the vehicle:
-with silage duct in the moving beside vehicle m 4
-by unloading from the bunker in stationary vehicle m 3,5
Rotation angle of silage duct ° 210+10
Storage hopper 
Capacity of storage hopper 12
Unloading from storage hopper in vehicle at a height of m 3,5
Width of unloading auger mm 2300
Grass header
Weight kg 1620
Type   frontal, solid cut
Coverage width m 5
Cutting height mm from 50 to 120
Cutterbar unit   segmental type
Drivegear of cutterbar unit   Planetary reduction
Type of mass flow constriction   auger
Header for stemmed crops
Weight kg 1470
Type   frontal, solid cut, drum type
Coverage width m 3
Cutting height mm from 120 to 300
Pick-up
Weight kg 850
Type of mass flow constriction   auger
Coverage width m 3
Self-propelled chopper
Operating weight of self-propelled chopper kg 18400
Dimensions of the self-propelled chopper in transportation position:
-length mm 7850
-width mm 3350
-height mm 4000
Typical size of track   700x100x102
Wheeltrack mm 2300
Road clearance, not less than mm 400

 

Вместимость топливного бака, не менее

Add a Feedback

Application for the purchase of equipment:

Name:

Address:

Phone:

E-mail:

What technique you want to buy?